Review our 2005 - 2009 Beta RR accessories
and contact your local dealer to order them today!
Simple, Fast . . .Beta
| |
ENGINE
Accessories |
 |
Billet oil drain plug.
Has magnetic tip. Sure to make you faster!
Made by Zipty Racing
AB-20102 $24.95 |
 |
Billet Oil Fill Plug
Easier to remove than the stock plastic plug. Will not melt under
extreme heat.
Has Beta logo on top!
Made in the USA
AB-20006 $26.99 |
 |
Billet aluminim plug that includes a magnet for catching debris.
Made by Zip-Ty Racing
AB-12004 $24.95 |
 |
Air Mixture Screw
Allows rider to adjust mixture with no tools.
Manufactured in the USA
AB-20007 $29.99 |
 |
Radiator Guards
Provides protection for those tough rides! Will work with cooling
fan kit.
Manufactured Boano Racing
AB-10124 $149.99 |
 |
For tight trail riding conditions. Turns on and off through
the use of a thermoswitch. Will work with IMS tank.
Made by Beta
AB-10105 $149.99 |
 |
Clutch Cylinder Guard
Used to protect the clutch slave cylinder. Note:does not work with
front sprocket guard or 15 tooth sprocket. Has Beta Logo on front.
Manufactured in the USA
AB-20009 $37.99 |
 |
Billet Oil Filter
Covers
Sold as a set. These covers include a magnet
for added protection.
Manufactured in the USA
AB-13100 $69.99 |
 |
Includes
friction plates, steels, springs, and cover oring.
These are factory plates!
Manufactured by KTM
AB-20012 $199.00 |
 |
Turns your Beta into an auto-clutch system while still retains
clutch lever action.
Made by Rekluse
AB-20003 $629.00 |
 |
Pre-oiled,
in a sealed zip-lock bag. Dual stage design.
Very high quality!
Made by Twin Air
AB-12001 $29.99 |
 |
Air
Box Cover
Goes
in place of air filter while washing out airbox or while servicing
filter.
Made by Twin Air
AB-10185 $32.99 |
 |
Oil Filters
OEM
Beta filters. Save money when you buy 2 sets at a time!
Manufactured by KTM
AB-20100 $32.99 |
 |
Tune
Up Kit
Kit
includes oil filters, orings, oil screens & orings, spark plug,
drain washer, air filter, & valve cover gaskets.
Assembled by American Beta
AB-20101 $94.50 |
| |
CHASSIS |
 |
Designed to add bling to your Beta. Should
make you go faster!
Made in Italy
AB-10188 (red) $79.99 |
 |
Designed to add bling to your Beta. Should make you go faster!
Made in Italy
AB-10187 (black) $79.99 |
 |
Includes 5mm billet spacer. Installs under the stock handlebar
mount.
Manufactured by Boano Racing
AB-10193 $28.99 |
|
Includes 10mm billet spacer. Installs under the stock handlebar
mount.
Manufactured by Boano Racing
AB-10192 $28.99 |
 |
For the stock 45mm Marzocchi Shiver forks.
Adjustable offset from 17.5-20mm for fine tuning
Manufactured in Italy
AB-10125 $649.00 |
 |
Fits all stock and billet clamps for your Beta.
Manufactured in Italy
AB-10135 $149.99 |
 |
Billet aluminum "shorty" clutch lever.
Anodized adjuster included. Works well with hand guards.
Manufactured by Boano Racing
AB-10186 $69.99 |
 |
Povides a smooth throttle. Aluminum end cap included,
can be removed to work with hand guards.
Made in the USA
AB-10134 $63.95 |
 |
Dual Material Rear Sprocket
Designed by Super Sprox in Italy.
Aluminum inner hub with steel sprocket teeth.
Made in Italy
AB-10249 (49t) $84.99 |
|
Dual Material Rear Sprocket
Designed by Super Sprox in Italy.
Aluminum inner hub with steel sprocket teeth.
Made in Italy
AB-10250 (50t) $84.99 |
|
Dual Material Rear Sprocket
Designed by Super Sprox in Italy.
Aluminum inner hub with steel sprocket teeth.
Made in Italy
AB-10248 (48t) $84.99 |
 |
Developed by PBI for a perfect fit. Made in USA
AB-10045 (45t) $55.99 |
|
Developed by PBI for a perfect fit. Made in USA
AB-10048 (48t) $55.99 |
|
Developed by PBI for a perfect fit. Made in USA
AB-10049 (50t) $55.99 |
|
Developed by PBI for a perfect fit. Made in USA
AB-10050 (52t) $55.99 |
 |
Turn your Beta into a weekend canyon bike! Kit includes 17" Rims,
hubs, hardware, bearings, shorter side stand, and front fender.
*does not include tires*
Manufactured Beta
AB-12007 (2008) AB-12008 (2009-2010) $1299.00 |
 |
Includes wheel bearings.
Also includes front brake rotor (not shown).
Tire not included.
Made by Beta
AB-10103 $649.00 |
 |
Includes wheel bearings.
Also includes rear brake rotor and rear sprocket (not shown).
Tire not included.
Made by Beta
AB-10104 $769.00 |
|
Add Bling to your Beta. Replaces the stock clevis on the rear brake
pedal.
Made in the USA
AB-10202 $39.95 |
 |
Solid
Brake Rotor
Replaces stock vented rear rotor.
Extends rear brake pad life in muddy conditions.
Made in Italy
AB-10171 $187.50 |
 |
GPR Version 4 Steering Stabilizer. Includes bar mount, stablizer,
post, and hardware.Has Beta logo laser ecthed in!
Available in black (red special order) Manufactured by GPR
AB-10112 $499.00 |
|
GPR Version 4 Steering Stabilizer. Includes bar mount, stablizer,
post, and hardware.Has Beta logo laser ecthed in!
Available in black (red special order) Manufactured by GPR
AB-10111 $499.00 |
|
Same kit as sub mount number AB-10111 but comes with special clamp
and machined top nut to fit the 50mm race fork.
Available in black Manufactured by GPR
AB-10110 $549.00 |
|
50mm race fork kit
Same kit as sub mount number
AB-10111 but comes with special clamp and machined top nut to
fit the 50mm race fork.
Available in black Manufactured by GPR 2007-2009
ONLY
AB-10110 $549.00 |
 |
3.2
Gallon IMS Tank, clear
Developed by IMS. Provides one extra gallon of fuel.
Made in the USA
AB-10118 $274.99 |
 |
3.2 Gallon
IMS Tank, black
Same spec tank as AB-10118 but in black for that "stock" look.
Made in the USA
AB-10118BK $274.99 |
|
3.2
Gallon IMS Tank, dry break
Our popular 3.2 gallon tank but with a dry-break top.
*Dry break receiver sold separate* Made in the USA
AB-10120 $274.99 |
 |
Works with Tank # AB-10174.
Made in the USA
AB-10175 $219.95 |
 |
Dry Break
Filler
To be used with all IMS dry break tanks.
Dumps 4 gallons in less than 5 sec. Made in the USA
AB-10174 $379.95 |
 |
Dry Break
Adapter
Designed to be used with IMS dry break tank for a normal screw-on
cap.
Made in the USA
AB-10177 $89.99 |
 |
Euro Race
Graphic Set
Exclusive Boano Racing team graphic set. Includes graphics and
number plate backgrounds. (plastic not included)
Made in Italy
AB-10195 $98.99 |
 |
This is a complete kit that includes graphics for front and rear
fenders, tank panels, number plates, fork guards, and swing-arm.
Made by Beta
AB-10193 $98.99 |
 |
Includes front and rear fenders, side number plates, front headlight
mask (RS style), tank panels, and fork guards.*Does not include
rear air intake or front brace as sown in picture.
Made by Beta 2008-2009 ONLY
AB-10197 $249.00 |
 |
Includes front and rear fenders, side number plates, front headlight
mask (RS style), tank panels, and fork guards.*Does not include
rear air intake or front brace as sown in picture.
Made by Beta 2008-2009 ONLY
AB-10196 $249.00 |
 |
Black
Plastic Set
Includes front and rear fenders, side number plates, front headlight
mask (RS style), tank panels, and fork guards.
Made by Beta 2008-2009 ONLY
AB-10199 $249.00 |
 |
Off-Road
Light
Replaces stock RS rear light. Less prone to damage while riding
off road. Includes brake light. Stock RS turn signals do not work
with this kit. *Not DOT approved*
AB-10131 $53.95 |
 |
Softer than stock
(much softer!) Available in two different shapes. Comfort style
is flatter on top over the stock seat.
Made in the USA
AB-10173 (comfort style) $59.99 |
|
Softer than stock (much softer!) Available in two different shapes.
Comfort style is flatter on top over the stock seat.
Made in the USA
AB-10172 (stock shape) AB-10173 (comfort style) $59.99 |
 |
Gripper Seat Cover
Designed to provide better grip. Has built-in nylon knee support
as well.
Made in the USA
AB-12006 $65.90 |
 |
1" taller seat provides a flatter seating position.Seat base
included.
Made by Beta
AB-10117 $149.99 |
 |
Beta
Factory Pegs
E xtra wide for better support. Stainless pins for added boot grip.
Manufactured by Beta/Boano
AB-10101 $219.99 |
| |
PROTECTION |
 |
Developed by Devol Racing. Wrap-around design for added protection.
Twice as thick as the stock plate.
AB-10200 $149.99 |
 |
Carbon
Fiber Skid Plate
Saves one pound. Easy to install. Makes your Beta faster!
Made by Beta
AB-10107 $189.99 |
 |
Give your Beta that factory look!
Made by Beta
AB-10106 $219.99 |
 |
Carbon
Fiber Air Scoop
Exclusive Beta race department part. Carbon frame with stainless
mesh.
Manufactured by Beta
AB-12005 $97.95 |
 |
Protects header pipe from rocks and falls. Also protects riding
gear from burning.
Made in the USA.
AB-10260 $99.95 |
 |
Factory Beta hand guards. Easy to install. All mounting hardware
included.
Made in Italy
AB-10108 $64.99 |
 |
Developed by Enduro Engineering for Beta. Fits all Beta handlebars.
Hand guard wings sold separate.
Made by Enduro Engineering
AB-10165 $78.99 |
 |
For use with AB-10165. Provides excellent hand AND clutch/brake
protection.
Made by Enduro Engineering
AB-10166 $24.95 |
 |
For use with AB-10165. Provides excellent hand AND clutch/brake
protection.
Made by Enduro Engineering
AB-10168 $24.95 |
 |
For use with AB-10165. Provides excellent hand AND clutch/brake
protection.
Made by Enduro Engineering
AB-10167 $24.95 |
 |
Billet aluminum, for the rocky sections.
Manufactured in the USA
AB-10389 $149.99 |
 |
Designed by Billet Racing Products. Will not flex in rocky conditions.
Manufactured in the USA
AB-10114 $74.99 |
| |
EXHAUST |
 |
FMF
Powercore
Add performance to your Beta! Includes removable spark arrestor
screen. Manufactured by FMF.
AB-10133 $349.00
|
 |
This is a complete system that includes a removable spark arrestor,
quiet inserts, carbon fiber guard, and spring tool. Saves 5 lbs!
Made in Italy
AB-20011 $899.00 |
| |
Suspension
Settings:
*Stock rear spring is a 5.4 (170-190 lbs) |
 |
Rear
Spring 5.2 (145-165 lbs)
AB-10152 (5.2 kg) $134.99 |
|
Rear
Spring 5.4 (170-190 lbs)
AB-10154 (5.4 kg, stock setting) $134.99 |
|
Rear
Spring 5.6 (195-215 lbs)
AB-10156 (5.6 kg) $134.99 |
|
AB-10158 (5.8 kg) $134.99 |
|
AB-10160 (6.0 kg) $134.99 |
 |
Original Marzocchi fork springs.
Manufactured by Marzocchi
22-52709-042 (.42 kg) $139.99 |
|
Original Marzocchi fork springs.
Manufactured by Marzocchi
22-52709-045 (.45 kg) $139.99 |
|
Original Marzocchi fork springs.
Manufactured by Marzocchi
22-52709-048 (.48 kg, stock setting) $139.99 |
|
Original Marzocchi fork springs.
Manufactured by Marzocchi
22-52709-050 (.50 kg) $139.99 |
 |
For all 45mm Marzocchi Shiver forks. Sold as a set.
Manufactured in the USA
AB-10123 $39.99 |
 |
50mm Marzocchi factory twin chamber fork. Includes race valving,
hard-coated tubes, Beta racing machined clamps. Fits all RS models.
Limited Production.
Manufactured by Marzocchi
AB-10128 $2499.00 |
